3D Printing on Top of a Shirt

Finished Product

Alright, today I am going to go through one of my favorite projects of the year.  The project we are going to be discussing is how we printed directly on top of our t-shirt.  I must confess that I was really worried that Dremel was going to be very upset at me for trying this out, but I heard nothing but good things from them.  So, now that we've got that out of the way, let's talk about how we did this.

Make sure your clips are firmly attached to the bed!

I will admit that I was nervous that I was going to light this shirt on fire.  I had visions of the fire alarm going off and having an epic fail while attempting this.  That, however, did not happen.  The trickiest thing about this is getting your shirt firmly attached to the bed.  You want to make sure it is pulled tight, so there are no wrinkles on the shirt, and then you will want to level your bed once your shirt is on top of the bed.  The biggest issue I had was having the clip on the left of the bed hit the filament.  On my first attempt, the clip hit that area when the bed was raising, which knocked the clip off.  After that, I adjusted where the clip sat, and it all worked well.

Time Lapse of the Print

Once the shirt was attached firmly to the bed without the clips being knocked off, it was smooth sailing.  The print was rather fast, and the Dremel 3D40 did an excellent job printing as well as it would with a normal print bed.  Looking back, I had the print probably a little too tall (the objects clink together), but it works well.  The most surprising thing to me was that there was absolutely no melting of the shirt at all.  The print is firmly attached to the shirt, but it can also be easily removed, which allows me to use the shirt again with other prints.  I have also been surprised at how durable this is.  I printed on this shirt 6 months ago, and the print is still firmly attached.

My students were very excited to see that I was printing on a shirt.  The beauty of this project is it gave a lot of my students completely new ideas on things to attempt using a 3D Printer.  This is a fun and easy project that you can attempt and be successful with.  As long as you have your shirt attached securely, you will be ready to go.

For more information, check out this video: https://youtu.be/NlQCWMVCr4M

Stepping Forward: 3D Printed Shoes

My high school kids have been printing their own shoes lately.  For the last month, students in my class have been using TinkerCad to create a shoe that they actually have to wear.  That's correct, the students have to wear a shoe.  Not only do they have to wear it, but they have to walk in the shoe as well.  This brings up all sorts of new issues like stress tests. 

Although this project seems rather straightforward, there are some hurdles that students had to think about.  First of all, some of the boys where size 12 shoes or above.  The Dremel IdeaBuilder 3D40 doesn't really support a shoe of that size, so this led to many of the boys finding girls in the class who had smaller feet.

The students got one attempt at printing this.  This is because many of these shoes are 16+ hour prints.  This brings up new issues, such as filament run out, power outages, etc.  The students also had to make sure their models did not have any unnecessary gaps, and they had to think of where to add supports to their models if needed.  Last, but not least, they had to think about their models and think of where new stresses are added to the model in order for them to walk in it.

This project was a lot of fun.  The majority of the students were successful in building their working models, and the students all enjoyed seeing what they printed out.

3D Printing a Key

In today's blog, I wanted to show you something that was a bit off the wall.  One of my students asked me how we could go from taking a photo of an object to printing a duplicate.  So, in this example, we are going to use a key.

Step 1:

One of the first things you will need to do to get this to work is a decent picture of your key.
For the purpose of this, I used PhotoShop.  At first, I had the image of the actual key.  Then I added a layer on top of the key and painted it black.  For some reason, the .gif file looks odd, but in the last step I removed the entire background just leaving me the black image of a key.  From there, I went to http://www.online-convert.com/ and turned my .jpg file into a .svg file. 

Step 2:  

Once you have your .svg file, you then need to turn it into an actual 3D model.  I used www.tinkercad.com for this.  When you open TinkerCad, you will notice an "import" button on the top right.  Once I did this, I simply imported my file.

Step 3:

If there is a tricky step, this is it.  You have to scale your key to the correct size.  I had measured his key beforehand, but you could do the same thing by looking up the key's dimensions online too.  After that, simply print your file.

I was really surprised at how easy this was.  The key worked too.  The only thing I would recommend is that if you were wanting to make a permanent key, you should probably print something besides PLA plastic.  If you are printing something quick though, it does work!

Note:  A video on how we did this is located here: https://www.youtube.com/watch?v=vNalicZTGK4

3D Printing Teacher Project - VR Goggles & Printing Keys

In this post, I wanted to show you how we went about creating our own VR Goggles.

To get started, I want to show you how we went about making VR Goggles.

Since VR Goggles seem to be the craze right now, we decided we'd make our own.  The only thing we did not print for this project were the lenses which you can easily find on Amazon.  We bought these for roughly $.30 a set.  So, this was relatively cheap.  The students had to design a case that would fit their phone.  They had to leave their phone in the case, and they also had to do the measurements to get this to work.

I did help the students a little by telling them they could find the dimensions of their phone case online.  Of course, the students could always just measure their case with a ruler too.  The most difficult part of this was determining the space they needed in the middle of their print so they could easily see the entire phone with the lenses.  This was made slightly more difficult, because the Google Cardboard I gave them as a reference had larger lenses than the lenses I purchased.  Regardless, the entire project turned out great.

One thing to consider while you are doing this project is the amount of time it will take to print.  Most of these prints took around 16 hours.  I encouraged the students to make these somewhat hollow too since most of their designs required them to hold their Goggles in the air.  They will want a design that is durable, yet easy to hold.

Last, but not least, I had the students submit their designs onto www.pinshape.com too.  I wanted the students to see how many downloads their print would get.  I think it is important for students to see how popular their designs are.

All in all, I thought this was a very successful project.  The students seemed to enjoy it, and surprisingly, this was pretty new to a lot of the students.  I figured a lot more of them had experienced VR type headsets, but for a few of them, this was their first experience with this.






Here is a video on this project too: Printing Your Own VR Goggles

3D Printing Teacher Project - Working with Clients

In this post, I wanted to explain how we used a Dremel IdeaBuider to print projects for a real client.

This lesson was created for our 3D Printing students as a lesson that went along with filling our TEKS requirements on presenting to a real client.  This project was created with that in mind, and since we are quite a distance from a lot of businesses, we had to take advantage of the employees we did have access to.  This lesson was used as an assessment of putting together some of the skills they have already learned, as well as really listening to a client and discovering what their needs are.

Being able to put a real client in front of the students, and forcing the student to actually build around someone else’s needs has been a great project for everyone involved.  The teachers end up with a product that they like and want to showcase in their classroom, and the student’s learn to adjust their build according to the feedback given by the teacher.

Each student was assigned their own teacher.  In fact, each student had to set up a meeting with their prospective teacher, and the teacher requested the student based on their pitch.  The products varied greatly from student to student.  Some teachers requested objects for their personal children, while others wanted things they could showcase in their classroom.  The main requirements for all students were the same.  They had to meet periodically with their teacher throughout the 6 weeks that were allotted for the project, and they had to keep track of their meetings with the teachers, and how their model had changed from the initial idea.

This really tested the student’s ability to create something that pleased their client.  The beauty of this project was it forced the student’s to really rely on their modeling to show their client what they were thinking, and it allowed the teacher to explain their thoughts right on the spot.  For this project, we also used Tinkercad.com to build our models.  Once the student and teacher had an idea for a model that they liked, the student would then print a ¼ scale model for the teacher.  After this passed the teacher test, the final product was printed.

Short Video Explanation